LiebeWH 7-30V 0-30A DC Current Detection Sensing Relay Module with Overcurrent and Error Calibration

Description

Setting description: Power on,display the measured current; (if the measured current terminal is none, the LED digitswill pulse) Press K1 for the second time(for over 1s to prevent misoperation), the screen shows: P11, k2 adjusts mode, K3 adjusts functionPress K1 for the second time, the screen flashes: 0.05,means the threshold I1 is 0.05A,K2 increasesI1, K3 increases I1Press K1 for the third time, the screen flashes: 0.10,means the threshold I2 is 0.1A; K2 increases I2, K3 increases I2Press K1 for the fourth time, thescreen shows themeasured current , entersthe standby stateLong press K2 or K3 in standby state to fine-tune the errorof the measured currentFunction description:P-11: When the measured current >I1(low limit current), the relay closed; When the measured current <I1, the relay opens;P-12: When the measured current >I1, the relay closes;Maintain the stateuntil the circuit board power off;P-21: When the measured current > I2(high limit current), the relay closes; When the measured current <I1, the relay opens;P-22: When the measured current> I2, the relay closes; Maintain the stateuntil the circuit board power off;P-31: When measured < I1, the relay closes; When the current >I2, the relay opens;P-32: When the measured current < I1, the relay closes; Maintain the stateuntil the circuit board power off;P-41: When the measured current is between I1 and I2, the relay closes,opensin other cases;P-42: When the measured current is between I1 and I2, the relay closes; Maintain the stateuntil the circuit board power off;P-51: When the measured current <I1 or >I2, the relay closes,opensin other cases;P-52: When the measured current < I1 or > I2, the relay closes; Maintain the stateuntil the circuit board power off.

Detection range is DC 0-30A with the accuracy of 0.01A. Can turn off the LED display to reduce power consumption. This module can detect the DC current value, control the on-off of the relay according to the limit current set by users. With error calibration function. Can be used to limit the current in the circuit, electrical equipment from damage caused by current.